How to Choose a Window Installer

You’ve thought long and hard about brand-new windows for your house; you considered design, products, energy performance and price. Now you have them purchased and all set it can be appealing to get them fitted as soon as possible. Regrettably choosing a window installer requires just as much factor to consider as picking the windows themselves. That’s because it’s crucial they are fitted appropriately otherwise they might cause you a number of issues down the line. We’re here to help though, with our specialist pointers on discovering the best window fitter

How do you set up brand-new windows?
While it can be tempting to wish to conserve a few pounds, when it concerns installing windows we suggest you seek aid from an expert. When windows aren’t installed properly they can trigger numerous problems, such as air and water leaks, and chances are you’ll probably have to get them adjusted eventually anyway. Play it safe and get your brand-new windows set up by an expert fitter.

What’s more, if you harm your windows by installing them yourself you will be accountable for the damages. We advise you constantly look for the services of a professional window installer.

When having your windows installed you ought to likewise consider time scales. If you’ve found someone to fit your brand-new windows you ought to also examine if they will be removing your old windows. If not, do they require you to remove the glass alone or the entire frame? Discuss this with your installer before concurring a time for them to come and fit your panes. You ought to also try and guarantee you remove and change your windows in one day. You don’t want to begin the job at 4pm on a Friday and need to wait up until Monday for conclusion– this leaves your home cold and vulnerable.

How to pick a window fitter.

  • Check they are accredited by an authorised body. Your installer should have a FENSA or CERTASS This ensures they have the ideal certifications and you can be assured that they understand what they’re doing. The last thing you desire is to invest cash on new windows only for them to be destroyed by bad installation.
  • Do not automatically choose the most affordable rate. While it can be tempting to save cash, the cheapest rate might be a risky alternative. You ought to bear price in mind; the most pricey does not always ensure the best service, however you should base your decision on other more vital requirement. For instance examining their accreditation needs to be the first thing you think about.
  • Bigger business will charge more, typically needlessly. There is nothing incorrect with choosing an established windows installer but be aware they will charge more for setup. A regional installer, with the exact same accreditation and skillset, will likely be a lot less expensive and might likewise be more going to be versatile to your schedule as they have more lenient work demands.
  • Check to see if they’ll be removing your old windows as well as installing your brand-new frames. The last thing you desire is to miss your time slot since the old windows are still in place when they come to fit your new ones. Clarify this before to make sure.
  • Examine suggestions, evaluations and previous work. This is as important a job as checking the installer is licensed. If your trimmer has the ideal qualifications however has a string of current, bad evaluations stating their installation work wasn’t level and triggered air leaks, then they are most likely not the ideal individual or business for the task. Reviews are a good way to inspect their services are up to scratch. When trying to find an installer you could constantly begin by asking loved ones for their recommendations as it might save you a great deal of legwork. Still do your research study on the recommendations, but this may help you discover somebody quicker.
  • Get several quotes for services. You might discover numerous people similarly certified with fantastic reviews, then you can start utilizing cost contrasts to discover the very best installer.
  • Do not be pressed into signing anything immediately. Do your research study first, never opt for your first quote even if the salesperson was persuading. Always do your research.
  • Examine the business or trimmer has insurance coverage. If anything was to fail with the setup and your windows got harmed you want to guarantee you can hold your fitter responsible. Check they have the suitable insurance because otherwise you’re going to face a large bill.

Just how much does it cost to install a window?

Different business will charge various rates and it is possible to have a substantial difference between your cheapest quote and your most expensive. With this in mind, it’s tough to give you a quantifiable variety. Local professionals or smaller sized installation business will be a lot more affordable than recognised nationwide brands however keep in mind there are other essential checks you will require to think about before even thinking of rate. When you’ve checked the window fitter is genuine and has excellent evaluations then you can consider cost.

Do anticipate to pay a deposit upfront. This is not unusual, you want to ensure somebody will turn up to fit your windows when they say and they wish to ensure they’re not going to waste their time and resources to be pull down at the last minute. A deposit is expected and gives both parties security. Don’t pay a deposit to your first quote nevertheless, make certain you shop around and discover the best services prior to signing any contracts and turning over any deposits.

Post Sponsored by Leeds Glazing – Local Glazier in Leeds.

Replacing Windows in a Conservation Area

Double glazing is basically a modern necessary, and few of us that live in a home which has it might think of reverting to living in a home with single glazing and the cold, the draughts, and the condensation that includes it.

For some of us, we do not have a choice. Specifically, those living in sanctuary might discover they’re not able to upgrade to double glazing, or that they need to battle really difficult to be okayed.

Let’s explore why this might be, and what can be done to change windows while still adhering to the guidelines of living in a sanctuary.

What is a conservation area?
A lot of locations have extremely loose preparation limitations and property owners can, within reason, do practically what they like to their residential or commercial properties. The result is that streets lack harmony and can feel thrown up.

Other locations have extremely stringent preparation laws– generally when historical structures are present, and modern house enhancements would have a harmful effect on the identity of the area, and undermine the worth of its homes.

Sanctuary exist to combat this phenomenon. They restrict what can be integrated in the location and the changes that can be made to existing buildings. This serves to safeguard the aesthetics of the area and the value of its properties. What’s more, if you buy a home in a street that has a certain appearance, an area’s preservation status uses guarantee that the look will remain more-or-less consistent in the future.

Considering that 1967, more than 9000 sanctuary have actually been designated across England. In practice, they permit your regional authority greater control over what can be thrown up and tore down, consisting of things like satellite dishes and trees.

What’s the difference between a conservation area and a listed structure?

When a home is in a conservation area the only concern is how it appears from the street. This indicates that brickwork, doors, and windows must be consistent.

If a structure’s listed, the interior is protected, too. Precisely what this indicates is distinct to each structure however as a basic rule, the internal structure of the structure must not alter and repair work and remodelling need to be carried out using original products.

If your house isn’t listed, however you reside in a sanctuary, you might need to look for planning permission before performing improvements that impact the external appearance of your residential or commercial property, such as replacing your windows. This will hold true if the home goes through something called a short article 4 direction– an unique power that gives your local preparation authority (and sometimes, the federal government) the capability to withdraw a few of your allowed advancement rights.

I live in a conservation area: should I repair or change my windows?
If you’re jumping through hoops to protect planning approval for the windows you want, you might be tempted to save yourself the hassle and simply repair them, rather.

You’ll still require to follow the guidelines– if fixing your windows includes replacing the glass itself, you probably won’t be able to get away with altering the sort of glass you use.

The name of the game must be to duplicate your present window as closely as possible. This might suggest that you end up paying somewhat over the chances– however the investment will show rewarding in the long run. For one thing, you’ll not be forced to tear the window out and start afresh; for another, you’ll be preserving the value of the whole street.

What about double glazing?
Double glazing works by sandwiching a layer of inert gas between two panes of glass. This seriously limits the flow of heat from one side to the other, increasing the energy efficiency of any given residential or commercial property.

But double glazed windows look various to windows with a single pane of glass. For something, they require a chunkier frame. For another, the glass tends to bend and bow as the atmospheric pressure modifications relative to the gas inside the window. From the street, this produces a warping impact that would keep an eye out of location in a period residential or commercial property.

With all that stated, there isn’t anything naturally incorrect with installing double glazed windows into a sanctuary– supplied that the local preservation committee do not judge your brand-new window to be a considerable departure from the old one. If you’re changing a single glazed window with a double glazed one, you might find that this demands a slightly chunkier frame, and glazing bars that sit atop the surface area of a bigger pane rather than dividing the window into smaller sized ones.

What’s next?
Preparation constraints can seem a little, well, restrictive. Particularly when you’re the one requiring to twitch devoid of them. When it comes to conservation areas, your regional authorities will have the final word over what’s enabled and what isn’t– this can mean it’s worth conference with your conservation officer before you make your application, to talk through the choices. Getting on great terms with them, and providing them with an in-depth plan of your intentions, will vastly increase your opportunities of being given the go-ahead.

Post Sponsored by Farnborough Glaziers – Local Glazier in Farnborough.

Mould on Windows: Causes and Solutions

Mould is a variety of fungus that grows in wet, dark environments. Throughout winter, air-borne beads of water can come into contact with the cold, glass surface of your windows and settle. This provides mould spores with the environment they require to flourish. This is terrible news for your windows, and it isn’t helpful for your health, either.

Can Mould on Windows Make You Sick?
If mould is enabled to accumulate, it will certainly look pretty revolting– however does that always indicate it’s unclean, or perhaps dangerous?

For asthmatics and those suffering from allergic reactions, the response is a guaranteed yes. Mould reproduces by launching microscopic spores into the air. If there’s enough mould on your window sill from condensation, then you’ll have a problem.

Even for those people who aren’t impacted by asthma, direct exposure to mould can lead to irritation of the eyes, skin, and lungs. The effect of prolonged direct exposure to mould is even more extreme. For this reason, utilise a mask and gloves while you’re cleaning it up, and make sure that the area is well-ventilated. On that note, let’s look at how to clean up mould off window frames and sills.

How to Get Mould off uPVC Windows
Cleaning up uPVC requires a mild technique. An abrasive cleaner can permanently (and quite quickly) discolour the plastic.

Excellent outcomes can be achieved with a combination of water and vinegar, at a ratio of around 4:1. Load the solution into a spray can and douse the affected location prior to wiping dry. The acids present in the vinegar will break apart the mould, enabling it to be easily scrubbed away.

How to Get Mould off Timber Windows
Now let’s take a look at how to get rid of mould from wood window frames. Timber will respond to moisture a little differently to artificial materials. Rather than resting on the wood, those small water molecules will permeate in between the fibres– which is why regularly treating your wood windows is so crucial.

You’ll want a various cleansing service depending on whether your window is finished or incomplete. In the latter case, vinegar, baking soda, or a mix of home detergent and water will work. Unfinished wood may need a more caustic service, because the mould might have permeated into the grain. Rubbing alcohol is usually an excellent place to begin.

How to Get Mould off Aluminium Windows
Given that aluminium carries out heat better than lumber or uPVC, it will get chillier. This indicates more condensation, and as a result, more mould. However unlike uPVC, you can securely clean aluminium windows with bleach.

It’s easy to eliminate mould from aluminium window frames using a combination of bleach and water, at a ratio of around 1:10. Spray onto the afflicted location and await the bleach to disintegrate the mould prior to rinsing. When you’re done, dry the window quickly to prevent the mould from returning.

Post Sponsored by Chester Glazing – Local Glaziers in Chester.

A Guide to Victorian Windows

The Victorian age was among enormous transformation for British market and architecture. It was also during the Victorian period that window tax (a real estate tax based upon the variety of windows a house had actually) was eliminated.

This outcome was houses being constructed with more windows. The commercial transformation also brought plate-glass production strategies that made large, heavy windows more affordable. Victorian windows were mainly of the ‘sash’ variety. Victorian sash windows did not open out on hinges in the same way as casement windows, however rather incorporated 2 or more panels which moved behind one another on tracks.

If you’re the owner of a Victorian home, you’ll probably want windows that match the exterior of the building.

How Do You Clean Victorian Windows?
Preferably, windows must be cleaned up twice a year– as soon as in autumn, and when as part of your spring clean. Try to clean your windows when it’s cloudy, so the soapy water will not dry quickly and leave undesirable streaks on the glass.

What cleaner should I use?
Vinegar will leave your windows extremely shiny– and it’s safe and natural, too. It’ll break down any caked-on grime in seconds, leaving a gleaming surface that’ll offer the window a new lease of life.

That stated, vinegar isn’t all that reliable at eliminating bacteria, so we ‘d suggest a minimum of sometimes using a specially-formulated window-cleaner, or old-fashioned soap and water. Scrunched-up newspaper or microfibre fabric need to be used to work the cleaner into the glass.

Repairing Scratches on Victorian Windows
If you’ve been unfortunate, some of the glass panels that comprise your window might have received knocks and scrapes throughout the years. These can typically be resolved with a little cerium oxide (or jeweller’s rogue, as it’s much better known). You’ll need to do a lot of rubbing to get this to work– either by hand, or with the help of a polishing pad attached to your home drill. You can likewise get special scratch-repair sets. They’re developed for vehicle windows, but will work just as well on Victorian sash windows.

How Do You Insulate Victorian Windows?
The majority of house owners select double-glazing to increase the energy efficiency of their windows. By trapping a layer of inert gas between 2 glass panels, the transmission of heat from one side of the window to the other is considerably minimised.

The difference in pressure in between the interior and the outside of a double-glazed window can produce a noticeable ‘bowing’ impact, which rather weakens the credibility of a Victorian-era residential or commercial property. As such, it’s often frowned upon by preservation officers.

So what options are offered to owners of Victorian houses seeking to lower their energy expenditure?

Secondary glazing
Secondary glazing operates in similar method as double glazing, except that rather than having whatever included in a single pressurised system, another window is positioned behind the very first one.

This will improve heat retention without jeopardising its look from the outside of the home.

Secondary glazing is vulnerable to drooping over time. An option is a sheet of plastic which can be unrolled and attached to the sides of the window in winter season, when heat-preservation is more of an issue.

Draught-proofing
Victorian sash windows aren’t usually as effective at keeping draughts at bay as casement windows.

There are numerous methods to decrease draughts in Victorian-era windows, ranging from fast masking-tape options to major overhauls which need disassembling the whole window. Changing old and used brushes with brand-new ones can have a substantial effect on the window’s heat-retention. This deserves considering if your windows are particularly old.

We need to also bear in mind that Victorian homes were built to aerate, which obstructing draughts can cause wetness to develop inside the home, which can in turn, trigger damp and mould.

How to Dress Victorian Windows
If you’re fortunate sufficient to live in an unspoiled Victorian property, then it’s crucial to keep all of your design consistent– and this extends right up to the window dressing. In the Victorian era, most windows were equipped with wood blinds and shutters, which supplied protection against sunlight on warm days, and security when the property owner was away.

Lots of Victorian houses likewise have high ceilings, which will allow you to stack roman blinds over the top of your window, and operate them with a cable.

You might want to hang heavy curtains in front of your windows. This will prevent the cold air near to the glass from joining the warm air in the space. If you’re decreasing this route, then you may wish to set up two sets of curtains: a light-weight ‘voile’ set that’ll ensure privacy while permitting sunshine, and a heavier blackout set of drapes to review the top.

If you’re going to accomplish a constant and genuine try to find your Victorian-era house, then taking your windows seriously is a must– however that need not indicate jeopardising too much on contemporary conveniences like energy effectiveness. Through routine maintenance, cleansing, and the right dressing, you can ensure that your Victorian-style sash windows last the distance– which they look great, too.

Post Sponsored by Sunderland Glaziers – Window Repairs in Sunderland.

How to Replace Sash Window Springs

A sash window is the 2nd most popular type of window after casement windows. They include a set panel, and a mobile ‘sash’ panel, which can sliding up and down to permit the window to open and close. This is possible thanks to a complex arrangement of cables, weights and springs, that are hidden into the frame.

Given that these systems are concealed, they tend to boast a long life expectancy. When they do fail however, it can be challenging to correct the issue and get the window operating once again– however possible.

Here we’ll stroll you through how to eliminate and replace among these components: the moving sash window springs.

What Do Sash Window Springs Do?

Traditional sash windows operate via a system of weights and sheaves that keep the sash in position. Weights are thoroughly picked to stabilise against the sash, so that when you open the window, you don’t have to really bear all of the weight on your own.

Obviously, this vastly increased the weight of the window. While you can still get weight-and-pulley sash windows, modern options utilise springs instead. This implies that instead of the weight of the sash being reversed by the weights in the frame, it’s counterbalanced by a set of springs, each attached to the sheave just as a weight might be.

A spring-based sash window will come with one spring on each side, with the pair stabilising the weight of the sash between them. When among the springs fails, your window will fall down on one side, and will not stay open. Now, it might be that it’s the cable connected to the spring that’s snapped rather than the spring itself. The only method to discover is to open up the window and check.

How to Replace Sash Window Springs
You will not need any specialised tools to do this task, though you will require:

  • A flat-head screwdriver
  • A brand-new sash window spring
  • Someone to help you.


Let’s run through the process, step by step.

Step 1.
You need to eliminate any stops that might be avoiding your sashes from rising too far within the frame. These are generally plastic, and removable with simply a little bit of force. You’ll discover them on the inside, near the top of the window.

Step 2.
Next, you’re going to take out the clips, which you’ll discover a couple of inches above the sash. These clips are created to keep the weights in place while the window is total. You may need to prise these away with the head of your screwdriver. You do not want to eliminate them completely; you just need enough room to raise the sashes.

Step 3.
You’re now going to eliminate the sash from the frame. If it’s a big sash, then make certain your volunteer has hold of the other end. You’re going to be lifting it up on one side, following which the other must slide out quickly. Lay the sash on the floor, someplace safe.

Step 4.
You’ll have the ability to see the spring balances now. Push on the top of them to launch the clips, and keep hold of the springs to prevent them unwinding. Raise the spring balance until there’s no more stress on it, and you’re able to quickly unhook it from the bottom of the frame. Don’t release it under tension, or you’ll run the risk of hurting yourself and harming the window.

Step 5.
Having eliminated the balance, it’s time to measure up for a replacement. To do this, determine the width across the back of the balance, and the height of the channel (not consisting of any accessories at the top or bottom of the channel). You’ll need to match those attachments up when you’re looking for a replacement channel.

Step 6.
If you don’t already have a replacement spring balance, you’re going to need to acquire one. It’s great to leave the window without a spring throughout this time; you simply won’t be able to open it.

Step 7.
As soon as you have your replacement spring to hand, you’re going to be connecting it utilising the hook at the bottom. There need to be a gap at the bottom of the frame that’ll accommodate it. To get the balance into the frame, you’ll need to push down until you can get the top of the balance below the screw. Once this is done, you’ll have a brand-new spring inside the frame, and all that’s left will be to change the sash itself.

Step 8.
Getting the sash back in might well be a 2 person task. You’re going to be lifting the sash right to the top of the frame and pressing the opposite side into position. You then lower the whole sash till you can feel it moving versus the spring balances. You’ll know if you’ve done it right, because the weight of the sash will right away reduce.

Step 9.
Lastly, we’ve got to re-insert the clips so they’re flush with the frame. Do this in exactly the same way as you took them out.

Step 10.
Prior to we complete, it’s worth inspecting that whatever relocations as it should. Be sure to lift and decrease the sash entirely, several times. When this is done, you can safely declare the window repaired.

Now, if all of this looks like a lot of work, we ‘d recommend you save yourself a long time later down the line and replace both springs in one go.

Post Sponsored by Hartlepool Glaziers – Find Us by typing in ‘Glazier Near Me‘ in your google search.

What Do You Call a Window That Doesn’t Open?

Do not be tricked, this isn’t a setup to a joke. As you are probably well aware, a lot of windows open.

Your casement windows, sash windows, hung windows; these are all commonly discovered windows that open up to let fresh air into your home. What about windows that don’t open? Is it a set glass window? A non-opening window? A set pane window?

We get a great deal of concerns on this and some individuals struggle to find the fixed window they seek due to the fact that they don’t understand the terms. We’re going to go through some of the popular types of non-opening window you can get for your home.

So, What Are Windows That Don’t Open Called?
There are numerous window types that do not open and they can make a really striking style function in your house. To save yourself going to a merchant and asking ‘do you have among those windows that aren’t truly a window because it doesn’t open, however it is made of glass and appears like a window?’– we’re here to clear things up and make shopping for windows simpler.

Windows that do not open are, generally speaking, called ‘fixed windows’– however let’s get into the most frequently types of set windows, so you know exactly what you’re talking about.

Picture Windows
Picture windows are a little window that looks just like an image frame, providing a clear and unsullied view of the exterior. These are terrific for letting extra light into a room that does not need ventilation. They can be truly big and fill a whole wall for example; or, they can be installed in say, a bathroom. Placed high enough, no one will have the ability to look in however you’ll still benefit from an extra channel of light.

Arched Windows

An arched window makes a definitely sensational design function. These are windows with an arched top, that very hardly ever open or close because of the design.

You can get one to open like a sash window, if you want.

Arched windows are frequently installed above opening windows for their appearance and extra light. A good example of where arched windows are used to full effect remain in big two-storey hallways. You could never reach it to open it, so a fixed arch window permits natural light to flood the house, and it looks fantastic. It also offers the area a duration home feel.

Glass Block Windows
Glass block windows are utilised to provide privacy whilst still allowing light to filter through. These can be set up as a translucent or transparent glass block window and make a good function for a front porch for instance, or in a restroom. You can likewise get a patterned style on glass block windows, making them a really stunning setup.

Circular Windows
No points for thinking how circular windows got their name. Extremely obvious, these are released in a similar style to picture windows, allowing natural light in without taking up excessive realty on your walls.

They’re also perfect for letting in extra light without sacrificing on privacy.They’ve also been used wonderfully in nautical themed rooms as synthetic portholes. Go even bigger for an unconventional window design that makes sure to get your visitors talking.

Transom Windows
Transom windows are panes of glass that are installed above a door. Often in a semi-circular shape or with ornamental detailing, these can really revolutionise the location around your front door.

They are also used to excellent effect throughout your house. They can be used for internal doors to let natural light circulation between spaces, or they can be used for decorative purposes.

Post Sponsored by http://wokingglaziers.co.uk/

Selling Your House Tips and Advice

‘ How do I make my house attractive to buyers?’ – you ask, well you provide a touch of luxury.

Our televisions have actually been flooded with aspirational remodelling, self develop, and home renovation programs which aim to take advantage of our living spaces. We are likewise continuously bombarded with pictures of celebrity homes in luxury publications, all of that make us desire a designer way of life.

A recent survey conducted for Polypipe Home Solutions has shown that house hunters want this touch of luxury, having designer features in a home encourages them to purchase, and more significantly they are prepared to pay additional for it.

Top Tips to Boost Sales Price
Being energy effective was the main factor home hunters offered for paying a premium price. The survey exposed that some home buyers are prepared to pay around ₤ 12,500 more for a house which had the features they desired, which included a conservatory, underfloor heating and double garage.

Other desirable home features listed by those surveyed included, walk-in closets, hot tub, air conditioning and even a set of stables. Now while most of us could not develop a steady block for the next owners of our house, it is a relatively easy thing to build a partition wall for a walk in wardrobe, and you can then get assist with fitting moving doors to finish off your job.

Top 10 aspirational functions house hunters are searching for:

  1. A house that’s energy efficient
  2. Conservatory
  3. Underfloor heating
  4. A double garage
  5. Cooling
  6. Jacuzzi bath
  7. State of mind lighting
  8. Balcony overlooking a large garden
  9. A modern interior
  10. Kitchen/diner

Post Sponsored by Richmond Glass 24/7 – Your Local Glazier in Richmond.

18 Energy Saving Tips you can do Free of Charge

Energy effectiveness is not just helpful for the planet, it can likewise be good for your pocket, however some energy effectiveness measures can have a large preliminary outlay and sluggish repayment. We believed we ‘d take a look at some energy conserving suggestions that you can do for complimentary: that’s right, these energy saving hints will not cost you a cent, and will save you a few quid here and there. Use them all together and you’ll be quids in and well on your way to doing your bit for a greener planet.

1. Turn your thermostat down by 1 degree: turning your thermostat down by simply one degree can save you an amazing 10% on your energy expenses each year.

2. Close your window vents: as long as you have adequate ventilation in your residential or commercial property, shutting window vents can reduce draughts and increase thermal comfort.

3. Time Your Showers: while all of us know what baths are a much better choice for energy performance than showers, timing your showers and keeping them to under 5 minutes is a sure fire way to enjoy the optimum energy effectiveness gain from your morning shower!

4. Heat your body, not the room: your granny was right, if you’re cold, put a jumper on! Ensuring your body is kept well finished up and warm will assist in saving unneeded heating expenses. It’s time to dig out the warm slippers and long underwear then!

5. Use lids when cooking: using covers on pots and pans when preparing your food will not only save energy, but it will prepare your food quicker. No requirement to wait so long for your tea!

6. Learn to batch cook: batch cooking suggests you are concentrating you usage of costly home appliances such as the oven and the hob and heating up in the microwave. This is a double whammy: batch cooking indicates you’ll use less energy on your oven and hob, and microwaves use simply 20% of the energy of a routine cooker.

7. Hang Your Laundry: offer your tumble dryer a rest, and treat your clothing a little much better, by line hanging your clothes. If the weather condition doesn’t allow it, you can use an indoor clothing dryer, although ensure you use it in a well ventilated location to avoid damp building up. You can save ₤ 115 each year by forgoing your tumble clothes dryer.

8. Try a cooler wash: while we’re on the topic of laundry, try washing your clothing on a cooler wash, as 40 or perhaps 30 degrees. Lots of detergents are now formulated to work specifically with lower temperature levels.

9. Unplug your appliances: unplugging unused or rarely used appliances can save an amazing 5-10% each year on your energy costs.

10. Change your energy provider: not only could you conserve hundreds of pounds each year, however you can also change to a supplier who offers renewable energy for greener energy use.

11. Deny the thermostat on your hot water tank: what’s the point in heating your warm water to scalding point if you’re simply going to add cold water to it? Save money (and burnt tootsies!) by declining the thermostat on your warm water tank and maintaining a more workable water temperature level.

12. Shut off lights when you leave the room: you no doubt tell your kids this but how guilty are you of this yourself? Going back to essentials like turning off lights as you leave a room can save you hundreds annually on your energy bills.

13. Only boil as much water as you need: when boiling a kettle, boil the water you require instead of a complete kettle. Not only will this boil faster, however it will also conserve energy.

14. Always do a complete load of washing: unless your washing device has a half load setting, guaranteeing that you do a full load of washing will save energy (and get the laundry done quicker!).

15. Vacuum your refrigerator: fine so this one sounds a bit strange, however if you can reach the back of your fridge, then give the pipework a vacuum. It will ensure that your fridge continues to work efficiently, using less energy while doing so.

16. Use the best size burner for the task: If your hob has various sizes of burners, then choose small burners for medium/low cooking and big burners for large dishes and quick cooking.

17. Use glass and ceramic meals when oven cooking: glass and ceramic ovenware keeps heat more effectively than other products, enabling greater heat conductivity, meaning you can lower the oven temperature.

18. Don’t dry clothes straight on radiators: drying clothes on radiators lowers the temperature of your radiator, forcing it to work harder to achieve its ambient temperature level. Invest in a drying rack to dry your clothes inside your house without putting your radiators under undue pressure.

Post Sponsored by http://www.newhamglass247.co.uk/

Don’t Replace Original Windows in Historic Buildings

Windows are a much maligned aspect of historical buildings: their seeming fragility and ineffectiveness, coupled with the double glazing boom over the last few years has actually resulted in original windows in traditional buildings often being viewed as something of a liability rather than the asset that they are.

As concerns about resource efficiency, retention of constructed heritage and sustainability end up being more pressing issues, keeping initial windows is becoming a much more attractive choice. But for those of your still thinking about new windows for your historic residential or commercial properties, here are five reasons why you must never ever change the original windows in your historic property.

1. Replacement Windows Aren’t Sustainable

You need to never ever change the initial windows in your historic property is that it is simply not sustainable. Treated correctly, original wood windows will withstand the test of time, lasting for as long as the residential or commercial property lasts. Replacement windows last anything in between 10 to 40 years, with the WWF finding that the typical UPVC window unit is replaced after just 18 years. Replacing initial windows with new, but poor quality windows, merely commences a cycle or waste and replace. As Scott Sidler from The Craftsman Blog states, “The greenest window is the one that is currently set up.”

2. Replacement Windows Destroy Built Heritage

Windows belong to what makes structures distinct, appealing and in-keeping with a particular time, period or design style. Even where a building is not noted, keeping the original windows is an easy method to maintain sought-after duration functions and ensure that your residential or commercial property remains true to the look and style of its age. As specified in the Craftsmen Blog “A big part of a historic home’s character is kept in its windows. Original historical windows were customised built to fit their frames and enhance the style of the house in a manner that no replacement can.”

3. You Might Not Get Planning Permission

Leading on from the value of maintaining built heritage, another reason to never get replacement windows in your historic home is that you might not even be permitted to! Planning consent differs across the nation; nevertheless, replacement windows for listed structures are typically not permitted unless they are on a like for like basis, and this implies expensive and undependable slim line double glazing. Even if you do select to go down the preparation authorisation path for replacement windows, you could wait on months or perhaps years to receive the appropriate consent that you need. It really is less trouble to restore your initial windows where required and invest in discrete and efficient secondary glazing.

4. New Windows are Difficult (Sometimes Impossible) to Maintain and Repair

Original windows are made to be repaired and brought back, so if your windows are draughty, rattle in the window or are painted shut that doesn’t indicate that you need to change them. Window repair specialists can perform a host of upkeep works to get your original windows running as good as brand-new. According to Time Money a total window overhaul usually runs ₤ 100 to ₤ 350 per window, and by the time you’re completed, the old windows may end up nearly as efficient as brand new ones.

You can even take a look at our other article on window repair and repair work to get you started, such as this one on How To Restore Your Original Windows.

5. You’ll Have Less Light

On average you get 15% less seeing location and for that reason less light due to replacement windows being set inside the original window opening. And nobody desires a home with less light!

6. You’ll Be Paying Them Off For Years

Replacement windows may seem like the kind of investment that will pay for itself, but is that really the case? The payback period for replacement windows can be anything from 40-60 years, according to Landmark Services or even up to 100 years according to Time Money! Include this into the truth that the best guarantee that the WWF could find for replacement windows was just 40 years, then you start to see how replacement windows are not quite the sound investment that their often touted as.

7. You’ll Reduce the Value of Your Property

Contributed to this the decrease in property worth you could be looking at if you change the windows. Buyers of historical homes will pay top dollar for houses that are chock loaded with original functions, and windows have a big part to play in this, with the most essential features that buyers search for being original floorings and windows.

Post Sponsored by Harlow Glass 24/7 – Double Glazing Repairs Specialists.

What you Need to Know About Secondary Glazing

Secondary glazing can still be something of an unknown quantity, after all, so many traditional systems are bulky, hazardous and ineffective: it truly gives secondary glazing a bad name! However it really is the best choices for lots of properties, especially if you live in a noted building or in a sanctuary. So that’s why we decided to assemble this blog site answering all of your secondary glazing questions.

Do I need planning consent?

Secondary Glazing is entirely demountable and detachable, and is totally invisible from the outside and essentially invisible from the inside. This is generally sufficient to satisfy regional preservation or preparation departments; however we would always suggest checking with your regional department.

Okay, so how will it look on my windows?

It is essentially invisible: both through the glaze and within the frame. We colour match our systems to fit your window frames exactly, to make them even more discrete. If you are worried we are constantly delighted to present clients to our existing pleased customers so they can view a nearby installation. We are called the unnoticeable system: our consumers are extremely pleased with the discrete appearance, with over 70% of our customers reporting that their windows look much better than in the past, providing the windows are shine like they have never ever seen before.

Great, so how much warmer will it make my property?

Secondary Glazing minimises heat loss through single glazed windows by 63%. In unheated spaces this equates as a boost in temperature level of five degrees centigrade.

Wow, and will it save me money on my energy expenses?

Yup, it lowers energy bills by a minimum of 22.5% where the previous temperature is maintained.

And does it decrease noise pollution?

It does. It reduces sound by a minimum of 48%, with numerous customers reporting a decrease of 70-80%.

Will it decrease condensation on my windows?

Yes, in two methods. First of all, is a warm product that raises the temperature level of the glazed area, suggesting that it is no longer a cold spot to draw in condensation. Secondly, it holds half its weight in water, enabling it to soak up existing condensation and moisture in the surrounding location. This implies that it effectively gets rid of condensation, although homes with especially bad condensation problems may take several weeks to see an enhancement.

I’m worried about UV rays fading my furniture. Can you do anything about that?

Absolutely. Secondary Glazing completely blocks ultraviolet rays through the glaze, eliminating fading of artwork, furnishings, wallpaper, curtains and photos. It likewise makes us the ideal option for nursery windows, office windows and for usage in shop fronts, museums, art galleries and anywhere else that needs UV security.

I have working shutters, will I still have the ability to use them?

Yes you will. Our system is fully compatible with working shutters allowing you to take advantage of the thermal abilities of both. When our system is used with working shutters it will give a u-value of simply 1.1: much better performance than brand new replacement window units.

My windows are an odd shape/ curved at the top can you set up on these?

Yes, our highly knowledgeable team of installers love a difficulty and will produce design templates to enable the system to be cut into any shape. They can likewise form bespoke framing on website to specifically follow any curves.

What is the biggest window you can install one system on?

The largest window that we can cover with one system would be 6100 x 2050mm.

Where can I keep the system, should I wish to remove it throughout warmer days?

To start with our system stops 27% of the sun’s heat from coming into your house so if you do get rid of the system it is most likely that you will be warmer.

Nevertheless, must you want to remove it, as standard we supply you with a cling movie wrap that can be wrapped around the system to ensure it is secured, we can also provide bespoke storage bags and parking docks, depending on what finest fits your needs.

Okay, this all sound great. When can you set up in my property?

Preparation is currently 6 weeks for installation and a minimum of 12 weeks in the winter season, so do not delay if you want to feel the advantages as soon as possible!

Post Sponsored by Glass Repairs Catford – Your Local Emergency Glazier.